DETERMINATION OF YEARLY PERFORMANCE AND DEGRADATION RATE OF ELECTRICAL PARAMETERS OF AMORPHOUS SILICON PHOTOVOLTAIC MODULE IN MINNA, NIGERIA
- Project Research
- 1-5 Chapters
- Abstract : Available
- Table of Content: Available
- Reference Style: APA
- Recommended for : Student Researchers
- NGN 3000
ABSTRACT
There is need for accurate knowledge of performance, degradation rate and lifespan of photovoltaic (PV) module in every location for an effective solar PV power system. Outdoor degradation analysis was carried out on amorphous silicon PV module rated 10 W using CR1000 software-based Data Acquisition System (DAS). The PV module under test and meteorological Sensors were installed on a metal support structure at the same test plane. The data monitoring was from 09:00 to 18:00 hours each day continuously for a period of four years, from (December 2014 to November 2018).The experiment was carried out near the Department of Physics, Federal University of Technology, Minna (latitude 09o 37'N, longitude 06o 32'E and 249 meters above sea level). The sensors were connected directly to the CR1000 Campbell Scientific data logger, while the module was connected to the logger via electronic loads. The logger was programmed to scan the load current from 0 to 1 A at intervals of 50mA every 5 minutes, and average values of short-circuit current, (Isc), open-circuit voltage, (Voc), current at maximum power, (Imax), voltage at maximum power, (Vmax), power(P) and maximum power(Pmax) obtained from the modules together with the ambient parameters are recorded and logged. Data download at the data acquisition site was performed every 7 days to ensure effective and close monitoring of the data acquisition system (DAS). At the end of each month and where necessary, hourly, daily and monthly averages of each of the parameters-solar irradiance, solar insolation, wind speed, ambient and module temperatures, and the output response variables (open-circuit voltage, Voc, short-circuit current, Isc, voltage at maximum power, Vmax, current at maximum power, Imax, efficiency, Eff, and fill factor, FF) of the photovoltaic modules were obtained. Annual yearly averages of the performance variables were carried out to ascertain the performance, degradation rate and lifespan of the module. The module performance for the four years of study was compared with Standard Test Condition (STC) specifications. The maximum power achieved at 1000W/m2 for the four years of study were 0.652W, 2.186W, 2.078W, and 1.812W representing 6.52%, 21.86%, 20.78% and 18.12% of the manufacturer’s 10W specification. Module efficiency at 1000W/m2 for the four years of study is 2.25%, 7.56%, 7.19%, and 6.27% respectively as against the manufacturers STC specification of 33%. Accordingly, Module Performance Ratios for the PV module investigated were 0.07, 0.23, 0.22 and 0.19 respectively. For the Rate of Degradation (RoD), it was observed that Open-Circuit voltage (Voc), Short-Circuit Current (Isc), Power-Output (P), Maximum Power (Pmax), had an average yearly degradation rate of 0.73V, 0.010A, 0.040W, 0.050W respectively for the four years of study. To also determine the lifespan of the module, an empirically determined statistical model given as YEAR = 3.36 - 0.237 Voc (v) - 71.5 Isc (A) + 8.07 Power (W) was fitted to the observed data to predict the lifetime of the module at any given year
Related Project Materials
IMPLICATION OF RAINFALL AND TEMPERATURE VARIABILITY ON PORTABLE WATER SUPPLY ANALYSIS IN CHANCHAGA LOCAL GOVERNMENT AREA, NIGER STATE, NIGERIA
ABSTRACT
In recent time, Minna, the Niger State capital has witnessed prolong period of dry season, heat stress and fluctuating pattern o...
THE IMPACT OF EFFECTIVE PERSONAL SELLING STRATEGIES ON THE MARKETING OF INDUSTRIAL PRODUCTS
ABSTRACT
This study was carried out to examine the impact of effective personal selling strategies on the marketing of i...
THE ROLE OF MANAGEMENT ACCOUNTING FOR SMALL AND MEDIUM-SIZED ENTERPRISES (SMES)
Abstract:
This study examines the role of management accounting in supporting small and medium-sized en...
APPLICATION OF MARKETING CONTROL TECHNIQUES IN MANUFACTURING FIRMS IN ENUGU L.G.A OF ENUGU STATE
ABSTRACT
The topics of this research work are the application of marketing control techniques in manufacturing firms in Enugu east local...
TAX ACCOUNTING CONSIDERATIONS FOR STOCK OPTIONS AND EQUITY AWARDS
Abstract: TAX ACCOUNTING CONSIDERATIONS FOR STOCK OPTIONS AND EQUITY AWARDS
This research explores tax accounting considerations for stoc...
THE IMPACT OF ONLINE MARKETING ON THE PERFORMANCE OF SMALL AND MEDIUM SCALE ENTERPRISES (SMES) IN NIGERIA
ABSTRACT
This study was carried out on the impact of online marketing on the performance of small and m...
OHU AND AMADI COMMUNAL COMPLEX IN NKANULAND- IMPLICATIONS FOR EFFECTIVE CHRISTIAN EVANGELISM
Introduction
The interest of linguists in analysing conversational texts has gradually shifted from the traditional focu...
COMPARATIVE ANALYSIS OF ACADEMIC PERFORMANCE IN BIOLOGY IN SOME SELECTED SENIOR SECONDARY SCHOOLS
Abstract
A comparative study of academic performance in Biology in some selected senior secondary schoo...
ROLES OF SELF OBJECTIFICATION AND APPEARANCE ANXIETY ON MARITAL SATISFACTION
ABSTRACT
This study investigated the role of self-objectification and Appearance Anxiety on marital satisfaction among...
THE INFLUENCE OF SUPPLY CHAIN RISK MANAGEMENT ON BUSINESS CONTINUITY
Abstract: THE INFLUENCE OF SUPPLY CHAIN RISK MANAGEMENT ON BUSINESS CONTINUITY
The objective of this study is to examine the influence of...
